Portfolio

Iron-Nickel Alloy FeNi42(Alloy42) for Pressure Sensor Standard Description Alloy 42 is a nickel-iron alloy that has a low, and normally constant, coefficient of thermal expansion up to 570 °F (300 °C). Physical properties Mechanical properties Special Requirement [...]

High Corrosion Resistant Nickel Alloy Inconel625(N06625) Standard Description Inconel625 is a nickel-based superalloy that possesses high strength properties and resistance to elevated temperatures. It also demonstrates remarkable protection against corrosion and oxidation. Its ability to withstand high stress and a wide range of temperatures, both in and out of water, [...]

Bimetallic Alloy TM3 (HITACHI: BH-2) Standard Description Thermal bimetal is a composite material that is firmly bonded by two or more layers of alloys with different linear expansion coefficients. The alloy layer with a larger expansion coefficient is called the active layer, and the alloy layer with a smaller expansion [...]

Bimetallic Alloy 5J1480 (HITACHI: BL5) Standard Description Thermal bimetal is a composite material that is firmly bonded by two or more layers of alloys with different linear expansion coefficients. The alloy layer with a larger expansion coefficient is called the active layer, and the alloy layer with a smaller expansion [...]

Resistance Alloy Cr30Ni70 Standard Description Cr30Ni70 is a nickel-chromium heating conductor alloy for operating temperatures of up to 1250 °C and often contains additives of rare earths for a higher resistance to oxidation, especially with frequent switching operations or broad temperature variations. The resistance to atmospheric corrosion at 20 °C [...]

Resistance Alloy Cr20Ni80 Standard Description Cr20Ni80 is a high grade austenitic alloy. It has good ductibility and strength at high temperature,In industrial furnace use Cr20Ni80 has many advantages due to its excellent mechanical properties in the hot state. Cr20Ni80 has superior life compared to competitive FeCrAl alloys because of the [...]

Resistance Alloy Cr20Ni35 Standard Description Cr20Ni35 is an alloy comprising of nickel-iron-chromium with silicon as an additive. Using silicon as an additive gives the alloy enhanced oxidation resistance. This alloy exhibits good strength at high temperatures and good resistance to oxidation and reduction environments. The microstructure of the alloy maintains [...]

Resistance Alloy Cr20Ni30 Standard Description Cr20Ni30 is an ideal material, it has good ductility,workability and weldability under high temperature and seismic strength. Nickel-chromium alloy with high and stable resistance, corrosion resistance, surface oxidation resistance, excellent coil-forming ability. Physical properties Mechanical properties [...]

Resistance Alloy Cr15Ni60 Standard Description Cr15Ni60 is an austenitic nickel-chromium alloy for use at temperatures up to 1150°C. It has excellent corrosion resistance and excellent performance.Heat resistant alloy applied in oxidizing atmospheres such as nitrogen, ammonia, unstable atmospheres containing sulfur and sulfur compounds. Cr15Ni60 has higher heat-resisting characteristic than Iron-aluminum [...]

Resistance Alloy CuMn7Sn Standard Description Resistance alloy with low resistance properties. Suited to use in high-current sensing resistors, and has good workability and weldability. Physical properties Application The alloy is suitable for the production of precision, normal and shunt resistors. [...]